My Flying Career

In response to Zach’s comment on my last post, I would like to take you on a little journey through my short and long-term goals.

My long-term goals are probably not that of most.  ’The Airlines’ do not necessarily entice me that much.  The schedules and what I’ve heard about how some pilots are treated does not outweigh the pay.  It doesn’t seem to be the dream job it used to be.  From what I have seen, it looks like charter, air taxi, air ambulance, corporate, or any other job that has a little bit more excitement is what I am pursuing.  This goal of course has its baby steps (to quote ‘What about Bob?’), so for my short term goal, I would like to get hired at a flight school as an instructor.  I think that instructing is a great way of building skills for yourself and a way of giving back a little of what you have learned (It’s also a more inexpensive way to build time).  From their I will start my search for a ‘puddle-jumping’ company hopefully here in the northwest.  Ameriflight, Empire Airlines, Seaport Airline, to just name a few.  You can only plan so far in advance before the plans are no more than hopes and dreams.  I’m the kind of guy who is very goal-oriented and having these short-term and a long-term goals is what drives me.

To shift gears a little bit, I have been practicing my Single Engine Commercial maneuvers and will be taking my Single Engine Commerical addon checkride very soon.  I’ll let you all know how that goes.

Thanks for reading!

Yesterday I flew to Eugene with a friend I promised I would take flying sometime.  Little did he know this would be more of an adventure than he signed up for.  The flight there was fantastic.  We flew IFR, because it had been a little while since I had been “in the system” and even the the weather was pretty good VFR weather, I like to keep current on at least IFR operations, even if it’s not necessarily in IMC.

Well, we arrived in Eugene, stretched at FlightCraft for a bit, watched the Seahawks kill the Rams, then went out to begin our trek home.  Before takeoff, I do what’s called a runup.  This is where you do your last minute checks to make sure all the radios and avionics are set, and you also runup the engine to about 3/4 power(1700 rpm in my case) and check the magnetoes.  The Cessna 172 engine has a dual magneto system for reliability and efficiency.  Each magneto supplies the spark for a spark plug on each of the cylinders.  So each cylinder has two spark plugs.  Well during the runup procedure you check the left magneto and the right magneto, to make sure that each side is working properly.  Because of the redundancy, you would probably never know if one went bad unless you manually shut one side off.  Well in switching to the right side, the engine lost between 200 – 250 RPMs and began shaking vibrantly.  The POH (Pilots Operating Handbook) for this aircraft states, “RPM drop should not exceed 125 RPM on either magneto or show greater than 50 RPM differential between magnetos”. This can sometimes be “normal” when you have a carbon fouled spark plug.  To clear the carbon fouled plug you would increase power and lean the mixture.  This, in effect, would burn off the carbon or oil that has contaminated the plug.  Well I did that a few times, and the right side magneto never got better.  The left side however was running like a champ.  I was very bummed, but I opted to taxi back and call the owner to see if he had any other ideas.  After talking to him and some other pilots in the area, we all agreed that there was something wrong with the airplane, most likely a bad magneto.  So we had to find ourselves a ride home.  I was waiting for the Lear 31 pilots that I was talking to, to offer a ride on their way back to Spokane, but that didn’t happen. lol.

My friends wife came down and picked us up and took us back to SLE.  We left Salem for a quick flight to Eugene and back at 3pm.  I got back to SLE at 9pm.  What a day.

Right now the plane is getting looked at and I will keep you all posted on the cause of the problem.

Today was a good day.  After a month of studying I passed my Commercial Pilot Knowledge test with a score of 91%.  That’s an A in my book.

So what does this mean and what do I do next?  Well this is just the first part of getting my Commercial License.  I still have my checkride which consists of a flying portion and an oral portion.  I also am getting two different commercial licenses.  I am getting a Single-Engine Commercial, and a Multi-Engine Commercial.  And those are two different checkrides that I will either take back to back (if I’m feeling up to the long day) or I will take very close to each other.

Over the past few months I have been flying a lot in the Club Cessna building time trying to get closer to the 250 hours required for the commercial license.  Well I now have 222 hours and am close enough that I will spend the rest of my time practicing commercial maneuvers and wiping off the rust on my Multi-Engine skills.

As part of the requirements I get to do a 250 mile straight line cross-country flight.  So basically I have to fly to an airport 250 miles straight line distance away.  And I’m going to do it in the twin!  I’m thinking I’ll go to Lewiston, ID.  But haven’t settled for sure.  Anybody have any good ideas?